PRODUCT FEATHURES:
Lamps: 3 in 1 encapsulation with tube, holder and epoxy resin of good quality. High brightness,low attenuation, high reliability, good consistency, strong environmental adaptability.
The black stripe mask of module: The black mask makes better color contrast with the display. And it keeps the screen body safe, away from dust, sunshine, collision of lamps.
Surface coating on PCB board: makes it moisture-proof, waterproof and anti-corrosion.
Multilayer PCB structure design: uniform current distribution, low-power consumption, fast heat dissipation. It extends lifespan of the led display.
Protection design: circuit with anti - interference and black screen protection design makes the led display more perfect.
High strength reinforced suit: module is strong and the screen will be flatter.
Lamps and driver IC on the same board design: It works more reliable than that on different boards.
Bottom chute design: chute and holes on the bottom of the module can drain off water, keep module dry and extend the lifespan.
What's 3 in 1 encapsulation?
3 in 1 encapsulation is 1R1G1B chips are encapsulated in one lamp. It's our new patent technology. It's much BETTERthan traditional encapsulation that 1 R1G1B are encapsulated in three lamps.
What's the characteristics of 3 in 1 encapsulation ?
1.Smaller pixel pitch: The smaller pixel pitch is, the better viewing effect viewer will get. Images is clearer, vivider and more exquisite. There is no doubt that small pixel pitch screen is more appealing to rental market.
2.No color anamorphose: chips line vertically, any viewing angle within range H:100/V:50 degrees without anamorphose. But the traditional 1R1G1B encapsulation show different colors when viewing from different angle.
3.Cost-saving: Less legs and glue, save material cost and labor cost for processing less legs.
4. Full color and bright luster: unique encapsulation, bigger chips, round top cap makes full color and high brightness, low attenuation uses thick glue for sun UV light, hence it protect LED Chips stable lifespan.
5. Lower Failure Rate: Less needles and 2/3 Less lamps improve the performance and reliability and reduce failures.
PRODUCT SPECIFICATION:
P10 outdoor DIP 3 IN1 Full Color LED Display Module Technical Parameters |
Led Module | Item NO. | P10(3in1)-4S |
Led Encapsulation | DIP570 |
Pixel Configuration | 1R1G1B (DIP3 in 1) |
Led Wave Length | R: 620-630nm, G:520-530nm, B:465-475nm |
Pixel Pitch | 10mm |
Module Resolution | 32x16 dots |
Module Dimension | 320mmx160mmx26.5mm |
Module Weight | 670g |
Frame Set Material | black PC |
HUB Type | HUB75 |
Power Watt | 35W |
Led Cabinet | Cabinet Resolution | 64x64 dots |
Cabinet Dimension | 640mmx640mm |
Cabinet Weight | 42.9 kg/pcs |
Module Quantity | 18pcs |
Pixel Density | 10000dots/sq.m. |
Protection Class | Front IP65, Rear IP54 |
Surface Smoothness | Gap less than or equal to1mm |
Electrical Parameter | Power | AC220V plus-minus 20% |
Power Consumption | Max:765w/sq.m., Ave:255 w/sq.m. |
Working Voltage | DC 5V |
Processing Performance | Drive Type | 1/4 constant driving |
Driving IC | MBI5124 |
Screen Refresh Rate | 60~85Hz |
Change Frame Frequency | 300-1000Hz |
Use Parameter | Output | composite interface, super video, component video graphics array, interactive digital video systems, high-definition multimedia interface, high definition standard data interface. |
Operating Temperature | from -40~+80 degree Celsius |
Operating Humidity | 10~95% relative humidity |
Control | Computer synchronization |
Lifespan | 100,000 hours |
MTBF | 5,000 hours |
Runaway Rate | less than or equal to 0.02% |